REVELPROG-IS Serial Srogrammer for EEPROM, FLASH, FRAM

Description

Application:

Serial memory programming in:

• Car electronics & automotive (reprogramming modules, radio-code, immobilizers, gps navigations, mileage correction and other modules with serial EEPROM and/or FLASH memories),
• computer and notebook service (data recovery, reflashing, upgrading and programming BIOS chips in motherboards, copier & fax machines, printers, hdd & ssd sata drives etc. ),
• network service (programming and cloning optical and ethernet SFP, QSFP, XFP modules),
• RTV/AGD maintaining or repairing (TV, digital cameras, tv tuners etc.),
• and many other devices equipped with serial IIC / SPI / Microwire EEPROM and SPI FLASH chips.

Main features:

• Reading / writing / erasing functions with user-friendly application interface,
• supported binary files (*.bin, *.rom, *.epp etc.) and Intel-Hex (*.hex) with possibility to load file to the buffer, edit it, calculate checksums, export changes as patterns, swap-bytes, compare with chip etc.),
• programming in socket or in external circuit (without unsoldering the chip – in system programming ISP),
• the target application device can be either powered by REVELPROG (possibility to change VPP and logic levels: 1.0V / 1.5V / 1.8V / 2.5V / 2.8V / 3.3V / 5.0V) or powered by an application with external power supply (1.0 – 5.5V),
• build in additional protection: buffered I/O pins internal connected only during programming + short circuit and overload protection (reduces the risk of damaging parts due to connection mistake),
• all I/O internal-connected only during programming,
• additional useful tools such as: user patterns, script programming (i2c & spi bus pirate), checksums, auto backups, file comparing (DiffChecker) etc.
• integrated sockets (ZIF + SOIC) with auto adaptive I/O pins reduces requirement of additional adapters,
• short programming time , e.g. WINBOND W25Q80BV (8Mb): read 0.9s (8,4Mb/s), write 3.3s (2,4Mb/s), MICRON N25Q128A (128Mb): read 12.8s (10Mb/s), write 37.6s (3,4Mb/s)
• software and firmware upgrades are freely available for all users on the Internet.

Technical data:

• Compatible protocols: IIC (I2C), SPI, 1-WIRE and MICROWIRE (uWire),
• supported device with 1.0V – 5.0V power supply,
• power supply and communication via USB 2.0 (hardware level, bulk transfer),
• programming with external power supply (1.0 – 5.5V),
• programming with internal power supply (1.0 – 5.0V, Imax = 100mA),
• operation speed (read/write) up to 10Mbit/s,
• ZIF-32 + SOIC-8 (150mil) integrated sockets,
• connector for in-circuit serial programming (ICSP) with buffered I/O,
• auto adaptive I/O pins connected only for programming time (Hi-Z in IDLE state),
• all I/O connected only for programming time (Hi-Z in IDLE state),
• short circuit and overload protection,
• software compatible with Windows XP, Vista, 7, 8 and 10 (32 and 64-bit)