Digiprog3 with FTDI V4.94 OBD

Description

Description:
This is the cheapest main unit of Digiprog III with OBD2 cable, software version is V4.94. With the use of the new Digiprog III, the odometer Repair. Intelligent accessories and extensive manuals are enclosed. This is the cheapest but useful odometer Repair tool.
Top 4 Reasons to Get This Main Unit of V4.94 Digiprog3:
1. Latest software Version: V4.94
2. Supported Multi-Languages: Deutsch, English, Espanol, French, Portuguese, Italiano,Turkish, Nederlands.
Function:
speedometer, engine control units, operating hours counter, keys, memory error, motorcycles, etc.DIGIPROG III Machine with full software Include
With the use of the new DIGIPROG III the odometer Repair. Intelligent accessories and extensive manuals are enclosed.
Features:
The Digiprog 3 Tachojustiergerat is the leading system for setting and programming digital speedometer.
The Digiprog 3 is the system, with modern hardware and latest software tachometer and speedometer repair for everyone in the simplest way possible.
You can use the Digiprog 3 for all speedometer, and engine control units, operating hours counter, keys, memory error, motorcycles, etc. easily programmed.
You get the unit of course with all the necessary cables as well as an image and textual manual.
Other features:
Service interval adjustments and settings
Assyst processing
Fault memory read-erase
EEPROM programmer
Integrated PC communication
3. There are only main unit and obd2, st01 and st04cable inside the package,lighter and easier to pass custom house.
4. Cheapest price
Digiprog 3 How to use？
1.Turn off your engine and locate the “Function” button on the front of DigiProg III Mileage correction tool
2.Press and hold the “Function” button while turning the engine on. DigiProg III Mileage correction tool will now enter calibration mode.
3.Press the “Function” button repeatedly to scroll through the options until you come to “Auto.”
4.Press and hold the switch until “-” is displayed. Release the switch when this appears. “Unit” will now appear on the display.
5.Wait until “Cal” appears on the display followed by zeroes, then drive your automobile until one mile clicks over on DigiProg III Mileage correction tool
6.Stop the car and then press and release the “Function” button. The mileage is now set.
Important Tips for Using Digiprog 3:
1. DO connect the Eeprom to the ST01 or ST04 before you connect to Digiprog3, which will avoid Electro static feedback (ESD).
2. Never solder the connections whilst the lead is connected to the programmer, which will damage DigiProg3.
3. DO keep your DigiProg3 in its case when not in Use & keep it in a dry environment at night (don’t leave it in the trunk of your car) If you are using solvents to remove lacquers’ from Eeprom’s ensure that they are cleaned completely, as the solvent will damage the clips.