ALTERA Emulator USB Blaster Download Cable FPGA CLPD NIOS JTAG Rev.C

 100% same as Original Altera USB Blaster Hardware Design!    * Much faster & reliable than cheap low-end USB Blaster

Q: Why is this Altera programmer more expensive than those cheaper Altera programmers?
A: This Altera USB blaster is designed based on 100% original Altera USB blaster hardware soltion: FTDI’s FT245+ Altera’s EPM CPLD chip solution. Unlike those cheap CY hardware solution USB Blaster. The original design uses FDTI+CPLD soltuion, which is the most reliable and fast design.
Q: Is the original hardware design solution better?
A: Yes, absolutely. The original Altera USB Blaster’s hardware design is much stable and faster when programming the Altera CLPD/FPGA chips. It’s designed to last, providing professional download speed and stable performance.
Q: How do I distinguish the original hardare solution USB Blaster from the cheaper ones?
A: Size & price. Orginal hardware platform uses FTDI’s FT245+ Altera’s EPM CPLD solution, which means definitely PCB bigger size. For those so-called “Mini” type USB Blaster, they’re 100% cheap low-end programmer, which can get really hot on its surface when running. For the price, even the single FTDI chip’s cost is much higher than the complete low-end altera programmer set.
100% same hardware platform designed from original Altera USB Blaster. Using FTDI’s FT245+Altera EPM CPLD chip soltuion, the most reliable & fast solution as Altera USB Blaster download cable.
Directly uses original Altera USB Driver.
Supported OS: Windows 8, Windows 7, Windows Vista, Windows XP & 2000
Provide much more stable & fast programming speed for your Altera system design work.
Support JTAG I/O voltage between 1.5V-5V
Support SignalTapII Embedded Logic Analyzer function
Support ALL Altera series components , including all CPLD and FPGA devices.
Key Features:
Supported target voltage : 1.5V-5V
Support all ALTERA deveice.
CPLD：MAX 3000A、MAX 7000A、MAX 7000B、MAX 7000S、MAX 9000、MAX 9000A and MAX II.
FPGA：Stratix、 Stratix II、Stratix GX、Cyclone、Cyclone II、Cyclone III、ACEX 1K、APEX II、APEX 20K、APEX 20KE、APEX 20KC、FLEX 10K、FLEX 10KE、FLEX 10KA、FLEX 6000、FLEX 8000、EPCS1、EPCS4、EPCS16、EPCS64EPC1、EPC4、EPC8、EPC16
Support JTAG,AS, PS mode:
Under JTAG mode:Cyclone、Cyclone II、Cyclone III、Stratix、Stratix II、ACEX 1K、APEX II、APEX 20K、APEX 20KE、APEX 20KC、FLEX 10K、FLEX 10KE、FLEX 10KA、FLEX 6000,FLEX 8000、MAX 3000A、MAX 7000A、MAX 7000B、MAX 7000S、MAX 9000、MAX 9000A and MAX II.
AS mode：EPCS1、EPCS4、EPCS16、EPCS64
PS mode：Stratix、Stratix II、Stratix GX.
Support NiosII embeded core based debug,with this debugger, there will be no warning windows poped up duringthe NiosII debug.
High performance, 10 times faster than ByteBlasterII !!
Driver Install Process:
1> Connect the device, and manually set the driver location to your Quartus install path, for example: C:\altera\quartus\drivers\usb-blaster
2> Run Quartus, and select the USB Blaster at Tools > Programmers, select the USB Blaster from HardwareSetup panel.
Package Included:
1 x  Altera USB Blaster programmer (original hardware design solution)
1 x 10-Pin Flex cable
1 x USB Cable